Advanced
Installation bracket for ADV-TOUCH-10
Allows surface installation

Advanced
Wireless amplifier
Up to 7 expanders used with each ADV-20-VW2W100
Easy installation, externally motorized
Bidirectional communications with all devices

Advanced
Wireless Translator Module
Allows you to add Advanced wireless devices within conventional systems
Wired output
Wired siren input to detect when there is an alarm and trigger wireless devices

Advanced
Address programming unit for loop devices
Allows to adjust internal values of detectors
Allows to activate/deactivate parameters in the modules
Compatible with AXIS range of detectors

Advanced
Red LED illumination
Wireless communication
Specially for fire
Housing made of white ABS
Each device is powered by lithium batteries
Primary and secondary batteries are constantly monitored
Dimensions 80x80x27 mm

Advanced
Wireless door holder
Quick and easy installation
Manual door opening button
Lithium battery
Fail safe monitoring according to BS 7273-4 : 2015 category A, B and C
High holding force
Closed door monitoring option

Advanced
Semi-flush bezel for Axis EN panel in small enclosure
345 x 340 mm (HxW)

Advanced
Semi-flush bezel for Axis EN panel in large enclosure
475 x 450 mm (HxW)

Advanced
Semi-flush bezel for Axis EN repeaters
ADV-MX-5010 / 5020
220 x 300 mm (HxW)

Advanced
Battery Temperature Sensor

The loop controller board is designed for use with the Axis EN range of analogue addressable control units
Provides control and connection to detector loops.
ADV-MXP-502 loop controller card is compatible with Apollo, Hochiki or Argus Vega.
ADV- MXP-567 loop controller card is compatible with Nittan protocol

Advanced
Fault Tolerant Ad-Net Network Card
Allows installation of up to 200 nodes
Up to 1.5 km of distance between nodes
Total network 20 Km

Advanced
Interface for plan management with standard network card
Connected to the AD-NET network
1 solo interface por red necesario - Versiones para red estándar y tolerante a fallos
Easily configured through PC-NET-003

Advanced
Network interface for IP connection with standard AD-NET network card built-in
1 only one module gives access to all the control panels of the AD-NET network
Configurable e-mail notification per event
Maximum 2 simultaneous users
Minimum screen resolution 1024 x 768
Compatibility with Axis EN series fire panels, Mx-5000 and Mx-4000

Advanced
Touch screen repeater
10" screen
Easy-to-use interface with easily configurable active maps using the Dynamix Tools Map application
Allows to evacuate / silence / resonate / restart / see fires / faults / disables / alarms / inputs / outputs...
1.000 registrations of general events and 500 fires
Surface and recessed accessories
Resolution 1280x800 (720p)
Standard network card integrated in the equipment for equipment connection

Advanced
Wireless amplifier
Up to 15 expanders used with each ADV-AXIS-TMT
Easy installation, externally motorized
Bidirectional communications with all devices
Taurus uses NetworkOptimiser technology, with more than 60 communication channels to avoid interference and channel collisions, regardless of the extent of the fire network or the scale of the building.
Each device features SafeSwitch dual redundant channel technology, so that if one channel fails, the other automatically takes over, ensuring unprecedented levels of reliability and performance.
The key to any successful wireless fire system is design and specification, which is why TauREX software has been developed, featuring an easy-to-use graphical user interface and innovative new features, such as EasyScan and ConfigWizard, to help specify the optimal system for each installation in a simple and intuitive way.
It also offers unprecedented system reliability and performance using SafePath Mesh Expander technology. If any chain expander fails, the transmission path uses an alternative path, ensuring continuity of communication.

Taurus uses NetworkOptimiser technology, with more than 60 communication channels to avoid interference and channel collisions, regardless of the extent of the fire network or the scale of the building.
Each device features SafeSwitch dual redundant channel technology, so that if one channel fails, the other automatically takes over, ensuring unprecedented levels of reliability and performance.
The key to any successful wireless fire system is design and specification, which is why TauREX software has been developed, featuring an easy-to-use graphical user interface and innovative new features, such as EasyScan and ConfigWizard, to help specify the optimal system for each installation in a simple and intuitive way.
It also offers unprecedented system reliability and performance using SafePath Mesh Expander technology. If any chain expander fails, the transmission path uses an alternative path, ensuring continuity of communication.
Advanced
Analog interface module for wireless detectors
Compatible with TAURUS equipment
Each module allows the addition of up to 32 wireless sensors, sirens or modules
Several modules can be placed in the same loop
Recommended frequency in Europe of 868 MHz and according to the EN54-25 standard

Advanced
Remote Display Terminal - Built-in keypad with internal repeater siren mute, view, enable/disable and test buttons
Allows you to see all the information of the network
Operating voltage 24V DC - Customizable LCD logo
Standard network card integrated in the equipment for equipment connection

Advanced
Standard Ad-Net Network Card
Allows installation of up to 32 nodes
Up to 1.5 km of distance between nodes

The advanced loop controller card allows the expansion of an additional loop for an MxPro 5 panel as long as the panel has the required capacity. nittan protocol compatible.
Advanced Loop Controller Card
Allows communication with Nittan protocol